Motul MoCool Radiator Coolant Additive 0.5 Litre

Motul MoCool Radiator Coolant Additive 0.5 Litre

Our recommended top engine cooling additive
Reduce engine temperature by 15°C (30°F)
Outstanding thermal exchange
Concentrated cooling fluid

TYPE OF USE:

Any cooling system of bikes, cars, ATVs… when overheating is observed or in racing conditions to decrease engine operating temperature.

PERFORMANCE:

• ASRA Approved (American Sport Bike Racing Association), WERA Approved –
• Motorcycle Road Racing Engines run cooler by 15°C (30°F) : Improves thermal exchange and engine cooling system efficiency.
• Cooling system optimal protection against corrosion.
• Recommended for magnesium, aluminium alloys cases, cast iron, copper, brass and bronze systems.
• Water pump protection, avoids cavitation.
• Anti-corrosion properties that remain while high temperature and ageing. Low corrosion inhibitors consumption.
• Seals, rubber pipes, and plastics parts friendly.

RECOMMENDATIONS:

• MOTUL MoCool is a concentrated cooling fluid that may be mixed with distillated water for immediate use as a coolant.
• Mix with water at 5% (20:1).
• Do not use pure product.
• Can be mixed with most coolants monoethyleneglycol based.

ATTENTION : – Some racing regulation do not allow anything else than pure water, if any doubt, check with race official organisation before using MoCool. Motul Company cannot be involved in case of race disqualification while using MoCool inappropriately. – MoCool does not provide any antifreeze protection.